BVMMV - TERAZZO M GROUT COMP F
- MSDS: BVMMV
- Manufacturer: CROSSFIELD PRODUCTS CORP
- Product Name: TERAZZO M GROUT COMP F
- National Stock Number: 5610-00N052560
Product Identification
Product ID:TERAZZO M GROUT COMP F
MSDS Date:03/01/1993
FSC:5610
NIIN:00N052560
MSDS Number: BVMMV
Responsible Party
COMPTON, CA 90221
US
Emergency Phone: 310-886-9100
Info Phone: 310-886-9100
Cage: 60782
Contractor
Telephone: 310-886-9100
Cage: 60782
Ingredients
CYCLOALIPHATIC AMINE; (CYCLOALIPHATIC AMINE EPOXY HARDENER)
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:MINOR BURNING TO EYES, NOSE,
THROAT & SKIN. CHRONIC:DEFATTING TO THE SKIN - DIZZINESS & NAUSEA.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NOT KNOWN.
First Aid
First Aid:INHAL:MOVE SUBJECT TO FRESH AIR. EYES:FLUSH W/WATER FOR AT
LEAST 15 MINUTES - CALL MD. SKIN:WASH W/SOAP & WATER. INGEST:DO NOT
INDUCE VOMITING - CALL MD.
Fire Fighting
Flash Point:220F,104C
Extinguishing Media:CO*2, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:TOXIC FUMES WILL BE EVOLVED WHEN THIS
MATERIAL IS INVOLVED IN A FIRE.
Accidental Release
Spill Release Procedures:SPREAD ABSORBENT MATERIAL OVER SPILL & PLACE
IN CLOSED CONTAINER. REMOVE ALL SOURCES OF IGNITION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY AREA.
Other Precautions:AVOID INHALATION OF HEATED VAPORS & SPRAY MISTS.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR IF VENTILATION IS
POOR.
Ventilation:GOOD VENTILATION. LOCAL EXHAUST &/OR MECHANICAL (GENERAL).
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORK GOGG .
Other Protective Equipment:AS NEEDED TO PROTECT SKIN CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:401F,205C
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PALE STRAW LIQUID; MODERATE AMINE ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
AVOID STRONG OXIDIZING AGENTS - AVOID CONTACT W/EPOXY RESINS IN
UNCONTROLLED CONDITIONS.
Stability Condition to Avoid:TO AVOID HIGH TEMPERATURES.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Conditions to Avoid Polymerization:AVOID CONTACT W/EPOXY RESINS UNTIL
READY FOR APPLICATION.
Disposal
Waste Disposal Methods:DISPOSE OF IN SANITARY LANDFILL ACCORDING TO
LOCAL, STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.